API 16A Blowout Preventer
| Application: | Oil Well Drilling Operation | Usage: | Oil Well Pressure Control Equipment |
| Material: | Class DD | Production Level: | PLS 2 |
| Temperature Class: | T | Standard: | API 16A |
| Product Name: | Double Ram BOP | Working Pressure: | 10000 Psi |
| Specification: | 13 5/8" X 10000psi | ||
| Highlight: | API 16A Blowout Preventer, BOP Pipe Blowout Preventer, RAMS Type Blowout Preventer | ||
API 16A Blowout Preventer FZ35-70 RAM BOP Pipe RAMS Type U 13 5/8``
Blowout Preventer / BOP is the important pressure control equipment widely used in onshore and offshore drilling operation. All ram BOPs are strictly conformed with API Spec 16A specification.
According to various working condition, we provide various kind of Ram BOP, such as single ram BOP, double ram BOP, triple ram BOP, quadplex Ram BOP. The Ram BOP is mainly composed of housing, side gate, hydro-cylinder, cylinder cap, piston, piston rod, lock shaft, sealing parts, ram, etc. Oil well's sealing or opening is achieved by moving ram, which is driven by piston rod and piston with hydraulic force. The RAM BOP is fetured with rapid open, labor-saving operation, easy maintenance, use for safe and so on.
Type of RAM BOP
According to the number of ram installed in each set, ram BOP can be divided into single ram, double ram and three ram BOP.
According to the ram opening and closing method, ram BOP can be divided into BOP of hydraulic control and BOP of manual control.
According to the ram locking method, ram BOP can be divided into manual locking and hydraulic locking.
Specification of RAM BOP
| Model | Working pressure /Mpa | Testing Pressure /Mpa | Vertical diameter (mm) | Connection | Length /mm | Width /mm | Height /mm | Max. outer diameter | Controlling set |
| FZ23-35 | 35 | 522 | 230 | 9" PSF | 1841 | 618 | 360 | 5 1/2" | FK50-2C |
| FZ28-35 | 35 | 522 | 280 | 11" PSF | 2170 | 947 | 520 | 7" | FKQ320-4 |
| FZ35-35 | 35 | 52.2 | 350 | 13 5/8" PSF | 2375 | 1026 | 870 | 9 5/8" | FKQ480-5 |
| FZ28-70 | 70 | 105 | 280 | 11" PSF | 2630 | 1120 | 900 | 7" | FKQ320-4 |
| FZ35-70 | 70 | 105 | 350 | 13 5/8" PSF | 2430 | 1085 | 884 | 9 5/8" | FKQ640-6 |
API 16A Wellhead Hub Clamp AISI 4130 PLS 3 For Connection
| Application: | Wellhead Connection Part | Usage: | Wellhead High Pressure Part Connection |
| Material: | AISI 4130 | Production Level: | PLS 3 |
| Temperature Rating: | PU | Standard: | API 16A & API 6A |
| Product Name: | Wellhead Hub Clamp | System Working Pressure: | 10000 Psi |
| Specification: | No.5 Clamp | Ring Gasket: | BX 155 |
| Highlight: | API 16A Wellhead Hub Clamp, AISI 4130 Wellhead Hub Clamp, PLS 3 Wellhead Hub Clamp | ||
API 16A No. 5 Clamp For Wellhead Connection Clamp Hub AISI 4130
The Hub Clamps is a kind of high pressure connection component for wellhead equipment. The clamps are different from all other API equipment in regard to design and hydrotest. Clamps serve as fasteners similar to bolts, they do not come in contact with well fluid, and they may connect several API specified connectors having different nominal sizes and working pressures.
The hub clamp is designed and manufactured according to API Spec 16A, Clamps provide a reliable means to join API and other hub connections. Any of the equipment in the following list may have clamp hub connections:
Wellhead Equipment
Casing Heads
Casing Spools
Tubing Heads
Valves
Chokes
Crosses
Tees
Flowlines
Drilling Equipment
Spools
Blowout Preventers
Choke and Kill Manifolds
Technical parameter of NO. 10 Hub Clamp
| Clamp No. | Nominal Bore | Working pressure | Ring gasket | Bolt Size |
| 1 | 1 13/16 | 10000psi | BX151 | 7/8-9UNX7 |
| 2 1/16 | 5000psi | BX152 | 7/8-9UNX7 | |
| 2 | 1 13/16 | 15000psi | BX151 | 7/8-9UNX8 |
| 2 1/16 | 10000psi | BX152 | 7/8-9UNX8 | |
| 2 9/16 | 5000psi | BX151 | 7/8-9UNX8 | |
| 3 | 1 13/16 | 20000psi | BX151 | 1-8UNX9 |
| 2 1/16 | 15000psi | BX152 | 1-8UNX9 | |
| 2 1/16 | 20000psi | BX152 | 1-8UNX9 | |
| 2 9/16 | 15000psi | BX153 | 1-8UNX9 | |
| 4 | 2 9/16 | 10000psi | BX153 | 1-8UNX 8 1/2 |
| 3 1/8 | 5000psi | BX154 | 1-8UNX 8 1/2 | |
| 5 | 3 1/16 | 10000psi | BX154 | 1-8UNX 8 1/2 |
| 4 1/16 | 5000psi | BX155 | 1-8UNX 8 1/2 | |
| 6 | 2 9/16 | 20000psi | BX153 | 1 1/8-8UNX9 3/4 |
| 3 1/16 | 15000psi | BX154 | 1 1/8-8UNX9 3/4 | |
| 4 1/16 | 10000psi | BX155 | 1 1/8-8UNX9 3/4 | |
| 7 | 5 1/8 | 10000psi | BX169 | 1 3/8-8UNX12 |
| 8 | 3 1/16 | 20000psi | BX154 | 1 1/2-8UNX13 1/2 |
| 4 1/16 | 15000psi | BX155 | 1 1/2-8UNX13 1/2 | |
| 7 1/16 | 5000psi | BX156 | 1 1/2-8UNX13 1/2 | |
| 9 | 5000psi | BX157 | 1 1/2-8UNX13 1/2 | |
| 9 | 11 | 3000psi | RX53 | 1 3/8-8UNX13 |
| 10 | 4 1/16 | 20000psi | BX155 | 1 7/8-8UNX17 |
| 7 1/16 | 10000psi | BX156 | 1 7/8-8UNX17 | |
| 9 | 10000psi | BX157 | 1 7/8-8UNX17 | |
| 11 | 5000 | BX158 | 1 7/8-8UNX17 |
API 6A Casing Head Suitable For Oil Gas Well Drilling Operation
API 6A Casing Head Suitable For Oil Gas Well Drilling Operation
Description
| Surface Treatment: | Painting | Flange Connection: | Welded |
| Material: | Alloy Steel | Flange Material: | Alloy Steel |
| Size: | 36”X 13-3/8”X 9 5/8" | Flange Rating: | 2000psi |
| Standard: | API 6A | Flange Type: | Weld Neck |
| Highlight: | Painting Wellhead Casing Head, API 6A Casing Head, Gas Well Drilling Casing Head | ||
Product Description:
Wellhead Casing Head is a high pressure-rated casing hanger housing designed to support and hang the casing string in a well. It is rated up to 2000psi and is available in API thread type and 13 3/8`` flange connection with welded and painted surface treatments. It is a robust and reliable casing hanger housing that provides an excellent seal to the wellhead and is ideal for high-pressure applications. The wellhead casing head is designed to provide superior performance and reliability, ensuring a safe and secure seal for the wellhead. It is made from high quality materials and is designed to withstand extreme conditions. It is an effective and efficient casing hanger housing that helps to keep the wellhead safe and secure.
Features:
- Product Name: Wellhead Casing Head
- Flange Material: Alloy Steel
- Thread Type: API
- Flange Standard: API 6A
- Flange Surface Treatment: Painting
- Flange Connection: Welded
Technical Parameters:
| 1 | EQUIPMENT - 5Kpsi SPLITTER WELLHEADS ( (2 IN 1) wellhead systems for 36”X 13-3/8”X 9 5/8 Casing scheme and 4 ½” (Single String Completion System) |
| 1.1 | LOWER HOUSING 36" CSW 2. IN 1., 36" SLIPLOCK BTM, C/W DBL "WQ" SEALS, W/ 20" NOM. 2,000 PSI WP 'D' SHAPED STUDDED TOP PROFILE W/ TWO 20" NOM. HANGER BOWL PREP. (20.500" CENTERS) FOR 13-3/8" O.D. CSG AND TWO 2" LP SIDE OUTLETS AND TWO 2" LP MONITOR PORTS COMPLETE WITH BULL PLUG AND 1/2" BLEEDER PLUG |
| 1.2 | CASING HANGER 20" X 13.3/8" BODY, FLUTED MANDREL CASING HANGER, 20IN NOM.3000 PSI, 13-3/8IN 68 LB/FT TSH BLUE BOX THD BTM X16.500-2TPI LH STUB ACME THD TOP, W/ 13-3/8IN OD SLICKNECK AND FOUR FLOW-BY SLOTS; MIN BORE: 12.360INAPI 6A; PSL-2; M/C: DD-NL; T/C: S,T,U,VBODY MATERIAL: 4140 LAS, 80KSI YS |
| 1.3 | COMPACT SPOOL ASSEMBLY 13-5/8 NOM, TYPE 'SSMC' TWO STAGE, 20 NOM. OEC 2000 PSI PSI 'D' SHAPED FLANGE BTM. W/ 13-3/8 DOUBLE 'T' SEAL BTM. X 13-5/8 NOM. API 5000 PSI 'JB' TOP CONNECTION W/ 13-5/8 'SRL' SEAL PREP TOP |
| 1.4 | TEMPORARY ABANDONMENT CAP 20 NOM 'D-SHAPED' FLANGE BTM W/13-3/8 DBL 'T' SEAL AND DBL O-RING SEAL OD. (2,000 PSI MAX WP), COMPLETED W/ 2" LP BULL PLUG & 1/2 NPT BLEEDER PLUG. API 6A 21ST EDITION, PSL 2, T/C: U, M/C: DD-NL;BODY MAT'L: AISI 4130 75 KSI YS. |
| 1.5 | CASING HANGER 13.5/8" X 9.5/8" CSG HGR, 13-5/8 NOM X 9-5/8 47PPFT TENARIS BLUE BOX THD BTM X 11.500 2TPI LEFT HAND STUB ACME THD TOP W/SLICK NECK FOR SEALS; RATED WORKING PRESSURE: 6,500 PSI; API 6A 21ST ED; M/C:AA,DD-NL; T/C:U; PSL-3; PR2; GROUP 1; MIN BORE: 8.647 |
| 1.6 | TUBING HANGER 13.5/8" X 4.1/2" ASSEMBLY, TUBING HANGER, TYPE 'SSMC', 13-5/8" NOM, W/ TWO 'LS' SEALS X 4-1/2" 12.6 LB/FT TOP BOX THD BTM, 6-1/16" EXTENDED SLICK NECK TOP W/ 6.375"-4-STUB ACME RIGHT HAND RUNNING THREAD, PREPARED WITH 4" NOM TYPE 'H' BPV PROFILE, W/ FIVE 1/4" CONTINUOUS CONTROL LINE C/W PIPE PLUGS. 3.90" MIN. BORE; API 6A 21ST EDITION, MATERIAL CLASS: EE-1.5, FF-1.5, TEMPERATURE RATING: U, PSL-2, PR-2, BODY MAT'L: SS 410 80K YS |
API 6A Oil Gas Wellhead Casing Hanger Spool For Flow Control
API 6A Tubing Head Spool Bottom Pack Off Type With Extended Neck Tubing Hanger
| Application: | Oilfield Wellhead Equipment | Usage: | Oil Well Drilling Flow Control |
| Material: | Class EE | Production Level: | PLS 3 |
| Temperature Class: | U | Standard: | API 6A |
| Product Name: | Tubing Head Spool | Working Pressure: | 10000 Psi |
| Top Flange: | 11" X 10000# | Bottom Flange: | 7 1/16" X 10000 # |
| Highlight: | tubing hanger wellhead equipment, tubing hanger spool | ||
API 6A Wellhead Equipment Tubing Head Tubing Spool With Tubing Hanger
The bottom pack - off is installed in the lower flange of the casing head spool and tubing head spool to prevent the lower flange from being exposed to high pressure.
The bottom pack-off type seals the annulus pressure by injecting packing. The bottom pack - off is designed to give a positive annular seal with pressure energized oversize O - Rings. For services at working pressures above 5,000 psi, the 'PP' seal is used.
When the bottom pack - off is used, the casing should be cut 90 mm from the top flange surface of the connecting spool.
Tubing Head Spools (THS) body have a straight bore with a 45 deg landing shoulder. While the top flange has hold down screws as standard equipment for securing tubing hanger, the bottom flange is designed for installation of bottom pack - off (PP- seal for high pressure over 5000 PSI) and is provided with bit guide, a plastic packing injection port with bleeder outlet and a test port. This can accept Tubing Hangers Mandrel Type, Wrap around type and Extended neck type.
Standard outlets are 2 1/16” 2000 -10000 PSI WP studded. Even 2” Line Pipe & Flanged outlets can also be provided. Studded outlets are threaded internally for the valve removal plugs. Top flange is provided with hold down screws to secure tubing hanger.
Specification of the tubing head spool with the tubing hanger 13 5/8`` * 5K x11`` -10K
| 1 | TBG SPOOL: 13-5/8"-5K X 11"-10K WITH TWO # 2-1/16" 10-K STUDDED OUTLETS. VR THD OUTLETS WITH DOUBLE PRESSURE ''P '' SEAL. API 6A PSL-2, PR-2, MATERIAL FF, TEMPERATURE "U". WITH PROVISION OF DUAL SPLIT TUBING HANGER AND PROVISION OF 1/4" DUAL CONTROL LINE. | Nos | 1 |
| 2 | ACCESSORIES FOR 11" X 10K FLANGE: RING GASKET BX-158 QTY(2). STUDS QTY (16 ) & NUTS(Qty:32) & , STUD SIZE 1-3/4", STUD LENGTH:15-1/4" | Set | 1 |
| 3 | SPLIT TBG HANGERS: TYPE "CXS", W.P 10K PSI, 11" X 2-7/8'' : (Qty:01) & 11" x 2-7/8" : (Qty:01) WITH "P" SEAL PSL-2, PR-2, MATERIAL FF, TEMPERATURE "U". Connections 2-7/8" Vamtop Box for each split hanger. | Set | 1 |
| 4 | GATE VALVE: 2-1/16" 10K WITH DOUBLE FLANGE ENDS, PSL-2, PR-2, MATERIAL-FF, TEMP "U" (QTY:04). RING GASKET FOR GATE VALVE: BX-152 (QTY:8). WITH NUTS (QTY:40) & STUDS (QTY:48) STUD SIZE 3/4" STUD LENGTH 5-1/2". BULL PLUGS 2" (QTY:2), COMPANION PLUGS (QTY:2) | Set | 1 |
| 5 | NEEDLE VALVE, ANGLE, 10K PSI WP, 1/2" NPT MALE THREAD INLET X FEMALE THREAD OUTLET | Nos | 2 |
| 6 | PRESSURE GAUGE, 4-1/2'' DIA FOR 5K PSI. | Nos | 2 |
| 7 | PRESSURE GAUGE, 4-1/2'' DIA FOR 10K PSI. | Nos | 2 |
| 8 | WEAR BUSHING AND RETRIEVING TOOLS , 11"X 10K | Nos | 1 |
| 9 | TEST PLUG RUNNING AND RETRIEVING TOOL FOR 11"X10K. 4-1/2" IF PIN X 4-1/2" IF BOX | Nos | 1 |
| 10 | RUBBER SEALS FOR TEST PLUG | Sets | 2 |
| 11 | 2-7/8" Plug | Nos | 2 |
| 12 | BACK PRESSURE VALVES FOR SPLIT TUBING HANGERS SIZE 2-7/8'' EACH | Nos | 2 |
| 13 | RETRIEVING TOOLS FOR 2-7/8" BACK PRESSURE VALVES | Nos | 1 |
| 14 | Grease Gun for above spools | Nos | 1 |
| 15 | Grease Sticks | Nos | 100 |
API 6A Wellhead Casing Head Spool 11”-3000PSI X 11” 5000PSI
API 6A Wellhead Casing Head Spool 11”-3000PSI X 11” 5000PSI
API 6A Wellhead Casing Head Spool 11”-3000PSI X 11” 5000PSI
Description
| Application: | Oil & Gas Well Drilling Operation | Usage: | Wellhead Casing Head Connection |
| Material Class: | DD-NL | Production Level: | PLS 3 |
| Temperature Class: | U | Standard: | API 6A |
| Product Name: | Casing Head Spool Assembly | Working Pressure: | 3000 Psi X 5000 Psi |
| Nominal Flange Size: | 11" | Process Type: | Forging |
| Highlight: | Wellhead Casing Head Spool API 6A, 3000PSI Wellhead Casing Head, Forging Casing Head Spool | ||
Wellhead Casing Head Spool / Casing Spool API 6A 11”-3000PSI x 11” 5000PSI,
Normally the wellhead is composed of the casing head, casing spool, and tubing head. Casing spools feature a versatile straight bore design that can accept a wide variety of slip and mandrel type casing hangers.The casing head spool is used to connect layers of casing and to seal the gap between the layers of casing, to support the BOP stack when drilling, and to hold the tubing head and Christmas tree after completion.
Ordered Specification of Wellhead Casing Head and Tubing Head
| No. | P.N. | Description | Qty | Unit |
| 1 | 0pt.1 | Casing HeadS pool, 11-3000PSIx 11"5000PSI, Secondary Seal PESeal Assy 7 Casing, Each casing heads pool includes: 1.Casing heads pool body-11"-3000psix 11"-5000psi 2.Manual Gate Valve, 21/16-5000psix 2, Forged type. 3.11"x 4 1/2" C22 Casing Hanger x 1 4.7"PE Seal Assy x 1 5.Lock-down screw x 4(Upper flange) 6.Companion flange 2 1/16-5000psix 2"LPx 2, 4130 forged 7.7/8" Stud bolt wth 2nuts- 16sets 8.7/8" Taper bolt with1nut-16sets 9.Ring gasket R24x 4 |
1 | set |
| 2 | Opt. 2 | Casing HeadS pool, 11-3000PSIx 11"5000PSI, Sec and ary Seal FSSeal 7*Casing.Each casing heads pool includes: 1.Casing heads pool body-11"-3000psix 11"-5000psi 2.Manual Gate Valve, 21/16-5000psix 2, Forged type. 3.11"x 41/2” C22 Casing Hangerx 1 4.7"FS Seal Assy x 2 5.Lock-down screw x 4(Upper flange) 6.Companion flange 21/16-5000psix 2"LPx 2, 4130 forged 7.7/8"Studboltwith2nuts-16sets 8.7/8Taperboltwith1nut-16sets 9.Ring gasket R24x 4 |
1 | Set |
API High Pressure Integral Forged Pup Joints Hammer Union For Pipelines
API High Pressure Integral Forged Pup Joints Hammer Union For Pipelines
Description| Application: | Oil & Well Drilling Operation | Usage: | Pipe Line Connection / Manifold Connection |
| Material: | AISI 4130 Forging | Production Level: | PLS 3 |
| Production Level: | PR1 | Standard: | API 6A |
| Product Name: | Wellhead Adapter Spool | Size: | 3"Weco Pipework |
| Working Pressure: | 5000psi - 15000 Psi | Working Condiction: | Standard Serive Or Sour Service |
| Highlight: | Integral Forged Pup Joints Hammer Union, API High Pressure Pup Joint, Pipelines Pup Joint | ||
API High Pressure Integral Pup Joints With Hammer Union For Pipelines
The high pressure pup joint is forged by high quality structural alloy steel according to API 6A Specification, the terminal union is forged together with pipe, which is able to avoid disassembling and ensure good sealing, small weight and fast installation. Hammer union end connection is designed to interchangable with weco wing union, including Fig.100, Fig.206, Fig. 207, Fig. 602, Fig. 1002, Fig. 1502, and Fig. 2002. The integral pup joint is widely used in the acidic operating environment (excluding containing CO2, H2S sour gas operating environment) in the high-pressure discharge line, input line, a temporary flow line, well testing, and other high-voltage transmission lines on pipelines.Specification of Wellhead Pup Joints
| Production name | Terminal connection type | Buckle model | Working environment | Buckling size |
| Pressure thread sealing pup joint | Tr100×12 | 42Mpa(6000psi) | 1 1/2" | |
| Non-pressure thread sealing pup joint | Tr110×8 | 70Mpa(10000psi) | 2" | |
| Integral pup joint | Union head fig602 | M×M | 105Mpa(15000psi) | 3" |
| Anti-sulfur integral pup joint | Union head fig1002 | M×F | 4" | |
| Welding pup joint | Union head ffig1502 | FxF | ||
| Welding flange pup joint | Flange | 2-1/16" 2-9/16" 3-1/16" 4-1/16" |
API LR 90 Degrees Wellhead Elbow Pipe Fitting 3”FIG1502 MxF
API LR 90 Degrees Wellhead Elbow Pipe Fitting 3”FIG1502 MxF
Description| Application: | Oil & Gas Well Drilling Operation | Usage: | Oil Well Flow Control Equipment Connection |
| Material Class: | AISI 4130 Forging | Production Level: | PLS 3 |
| Type: | Integral Elbow 90 Degree | Standard: | API 6A & NACE MR0175 |
| System Working Pressure: | 10000 Psi | Product Name: | Wellhead Integral Fittings Elbow |
| Specification: | 3" | Connection: | Flange & Fig 1502 |
| Highlight: | 90 Degrees Elbow Pipe Fitting, Wellhead Long Radius Elbow, Oil Well LR Elbow | ||
API Elbow LR 90 degrees 3”FIG1502 MxF Long Radius Elbow Pipe Fitting
The Elbow is the connection part of wellhead equipment, which is the high pressure integral pipe fittings, which is desgined with flanged and union connection. The Long Radius / Long Sweep Elbows including 90 degree elbow , 45 degree elbow and 60 degree are connected with wellhead equipment for various well service such as well testing service and well production service etc. The long radius elbow is applied as the connectors for various pipings, manifold or wellhead connection. The Elbow manufactured according to API 6A is integral forged type with inlet and outlet flanged or Weco union or Line pipe thread, and the elbows are available in different dimensions and connections with detailed specificationSpecification of Wellhead Elbow
| Product Name | API Integral Pipe Fittings |
| Types | Tees, Crosses, Crossover, Laterals, Wyes, Elbows, Long Sweep Elbows |
| Size | 1″, 1-1/2″, 2″, 3″, 4″ |
| Temperature Rating | -29℃~121℃(PU), -46℃~121℃ (LU) |
| Pressure Rating | 6000 PSI to 20000 PSI |
| Material | Alloy Steel(Integral Forged) |
| Standards | API Spec 16C, API 6A, NACE MR0175, ISO 9001, ISO14001 etc |
| End Connection | Fig 602, Fig 1002, Fig 1502, Fig 2002, Flange, Thread |
| Interchangeability | Integral Fittings are interchangeable with FMC integral fittings and SPM integral fittings and other major brands. |
| Performance Requirement | PR1, PR2 |
| Product Specification Level | PSL3 |
| Service | Standard Service, Sour Gas Service |
| Application | Fracturing manifold, cementing manifold, maintenance manifold, test manifold, high-pressure well service flowlines, fracturing flowlines, well testing flowlines, cementing and circulating flowlines etc |
Cast Handling Tools Type B Manual Tong Complete With Jaw Assembly
Description
| Application | Oil & Gas Well Drilling Operation |
| Usage | Wellhead Handling Tools |
| Product | Manual Tong |
| Standard | API 7K |
| Process Type | Cast |
| Condition | New |
| Size | 3 1/2" - 13 3/8" |
| Material | Alloy Steel |
| Working Condition | Standard Service |
| Highlight | Type B Manual Tong, Manual Tongs Drilling With Jaw Assembly, Cast Oilfield Handling Tools |
Type B Manual Tong Complete With Jaw Assembly For Handling Tools
The manual tongs are designed and manufactured in accordance with API Spec 7K-2010 Which is a useful tool applied to make up and break out drill pipes, coupling hoop of the drill pipe, joint, casings, casing hoops etc.When raise drill tool up and fall it down. Changing lug jaws and handling shoulders or hole can adjust the handling size of the tongs. According to the requirements of the usage different torque's tongs can be chosen. Manual Tong body is connected with joint pin on the boom and hangs over the well rigs through the balance head and adjustable square head screw.The pipe threads could be tightened or removed as soon as the steel wire rope which is fastened on the tongs line pin has been pulled firmly after the latch and the lug jaw have been looped and the pipes have been held by the tongs head.Part list of Type B Manual Tong
| Item# | Description |
|---|---|
| NP | Safety Handle Kit |
| NP | Tong Die Retainer Pin |
| Type "B" Tong Complete W/Short Lever Less Lug Jaws | |
| NP | Cotter Pin |
| NP | Removable Hinge Pin |
| Type "B" Tong Complete W/Standard Lever Less Lug Jaws | |
| 1-6 | Short Lever Assy. F/Type "B" Tong |
| 1 | Standard Lever Only F/Type "B" Tong |
| 1-6 | Standard Lever Assy. F/Type "B" Tong |
| 1 | Short Lever Only F/Type "B" Tong |
| 2 | Name Plate |
| 3 | Name Plate Screws |
| 4 | Grease Fitting |
| 5 | Tong Line Pin F/Type "B" Tong |
| 6 | Tong Line Pin Retainer |
| 7-10,12-15 | Set Back Hanger Assy. F/Type "B" Tong |
| 7-10,12-15 | Hanger Assy. F/Type "B" Tong |
| 7 | Hanger Only F/Type "B" Tong |
| 7 | Set Back Hanger Only F/Type "B" Tong |
| 8 | Balancing Screw |
| 9 | Balancing Screw Bolt |
| 10 | Lock Nut |
| 11 | Hinge Pin Retainer (Cotter) |
| 12 | Suspension Ring |
| 13 | Hanger Adjustment Screw |
| 14 | Hanger Jam Nut |
| 15 | Hanger Bolt |
| 16 | Safety Handle Kit |
| 17 | Lever Hinge Pin Block |
| 18 | Long Jaw F/Type "B" Tong |
| 18-29,31,36 | Long Jaw Assy. F/Type "B" Tong |
| 19 | Adjustable Stop |
| 20 | Adjustable Stop Plunger |
| 21 | Adjustable Stop Spring |
| 22 | Adjustable Stop Bolt |
| 23 | Adjustable Stop Bolt Nut |
| 24 | Cotter Pin |
| 25 | Booster Plunger |
| 26 | Booster Plunger Spring |
| 27 | Booster Plunger Retainer Plug |
| 28 | 1/2" x 1 1/4" x 5 7/8" Tong Die |
| 29 | Tong Die Retainer (Roll Pin) |
| 30 | Threader Hinge Pin |
| 31 | Hinge Pin Nut |
| 32,28,29,31,36 | Short Jaw Assy. |
| 32 | Short Jaw Only |
| 33 | Latch Only |
| 33,28,29,4 | Latch Assy. |
| 34,31,36 | Latch Assy. (Latch, HP Nut & Groove Pins) |
| 34 | Latch Only |
| 35 | Latch Spring |
| 36 | Groove Pin F/Hinge Pin Nut |
| 41F | 12 3/4" - 13" Lug Jaw Assembly |
| 41 | |
| 41D | 9" - 10 3/4" Lug Jaw Assembly |
| 41C | 6 5/8" - 9" Lug Jaw Assembly |
| 41B | 4 1/4" - 6 3/4" Lug Jaw Assembly |
| 41A | 3 1/2" - 5" Lug Jaw Assembly |
| 41G | 13 3/8" Lug Jaw Assembly |
| 41E | 11 3/4" Lug Jaw Assembly |
