Xtreme Duty Grapple Bucket
Xtreme Duty Grapple Bucket Attachment designed for skid steer and tractor loaders 51-150 horsepower. Grapple buckets are designed for harsh environments to be used to remove building, forestry, and scrap yard debris. Large opening of over 44″ to clamp large loads evenly. This grapple bucket is available in 60″, 67″, 73″, and 82″ models.
Product Features:
- Low profile for improved load visibility
- 19 wide lids are uniform between our Root Grapple and Grapple Bucket lines
- Large grapple opening of over 44 designed to clamp evenly around load
- Maximum grapple clamping force: 6,000 lbs @ 3,000 psi
- 5/8″ x 6″ bolt-on reversible cutting edge for all models
- Radius mold board for improved unloading and added strength
- lid tines and heavily-gusseted lids
- 1 pivot pins and 2″ bore cylinders
- Covered hoses for full protection in harsh environments
- Rear hitch designed to match host machine
- Models include 60, 67, 73 and 82
Designed for:
- For skid steer loaders and tractor loaders with 51 – 150 horsepower
- Ideal attachment for harsh environments
- Used for the removal of building, forestry and scrap yard debris
Shipping & Delivery
Related products
Bolt-On and Weld-On Teeth
Bolt-On Teeth are for use with all Construction Attachment general purpose and 4-in-1 multi-purpose buckets when digging, excavating or loosening compacted soil.
6BTCTE05: Regular Bolt on Tooth
GP: Compact 60” to 72” & Xtreme 62” to 78”
4in1: Compact 54” to 72” & Xtreme 60” to 76”
6BTCTE34: Large Bolt on Tooth
GP: Xtreme 84”, Severe Xtreme 67” to 88”, Ultra 73” to 84”
4in1: Severe Xtreme 67” to 84”, Ultra 73” to 84”, Industrial 88” to 93”
6BTCTE34: has replaceable tips & roll pin
6BTCTI01: AD-156 Tip
6BTCPI01: 156 Coil Roll Pin
6BTCTE06: GP & 4in1 Weld on Tooth
GP: Xtreme 62” to 84”, Severe Xtreme 67” to 88”
4in1: Xtreme 67” to 76”, Severe Xtreme 67” to 84”, Ultra 73” to 84”
6BTCTE06 has replaceable tip & pin
6BTCTI03: 8330 Tip
6BTCPI02: RP-H23 Rubber Flex Pin
Hydraulic Breakers – Skid Steers
onstruction Attachments Hydraulic Breaker for Skid Steer Loaders are designed for construction and demolition of concrete structures, rocks, asphalt, and more.
Designed for aiding in construction and demolition of concrete structures, rocks, asphalt, etc.
- Constructed of high strength steel to provide structural durability
- Silence kit ensures noise protection, prevents dust and debris from entering breaker housing
- Cushion Damper provides protection to the host machine
- Auto Stop (Anti Blank Fire) System ensures less problem of the components and longer life of the breaker
- Specify make and model of host machine when placing order
- Weights may vary based on selected hitch styles
- Use of unsuitable hydraulic couplers or hoses can cause damage to internal components of breaker.
- Hydraulic lines < 60 gpm – use 1.0 inch lines AND > 60 gpm – use 1.25 inch lines.
- Dry firing hydraulic breaker can result in damage to internal components of breaker and host machine.
- Chisel paste must be used with hydraulic breakers, using high temperature grease as a substitution for chisel paste will cause damage to components of breaker.
- Consult with appropriately trained hydraulic specialists prior to placing breaker into service.
- Read operators manual before use.
- Check hydraulic flow and pressure before use.
- Instruct owner/operator on proper use of hydraulic breaker before delivery of machine or product.
Xtreme Duty Snow Blade Attachment
Xtreme Duty Snow Blade is a specialty attachment with a four-way blade capable of up to 30 degrees of angle (left or right) with a manual or optional hydraulic kit*. Designed for rubber tire skid steer, compact track loaders and tractor loaders up to 100 hp and a 30" moldboard. This dozer blade is available in either an 84", 93" or 108" wide model (7 - 9 feet wide), with Manual or Hydraulic operation. The blade also had an available Steel or Rubber edge option and a high visibility dozer guide for use and accuracy in low-light and high-snow conditions.
